通氣減壓閥 DA 284 IP66(不銹鋼)
Make cut-out ? 40.5+0,5mm in enclosure wall and mount pressure compensation device with nut. Please make sure that the sealing gasket is put in place on the outer side panel of the enclosure. For opti
TECHNICAL DATA
| Mounting | thread M40 x 1.5 with nut | |
| Torque | 5Nm | |
| Depth in enclosure | approx. 9mm | |
| Sealing | sealing gasket NBR | |
| Filter |
|
|
| Air permeability | 1200l/h at a pressure difference of min. 70mbar | |
| Dimensions | ? 58 x 31mm | |
| Fitting position | variable | |
| Operating/Storage temperature | -45 to +80°C (-49 to +176°F) | |
| Approvals | VDE |
Installation
Make cut-out ? 40.5+0,5mm in enclosure wall and mount pressure compensation device with nut. Please make sure that the sealing gasket is put in place on the outer side panel of the enclosure. For optimal pressure compensation we recommend to use two devices on opposite sides towards the top of the enclosure.
| Art. No | Stainless steel | Protection type | 1 packing unit | Weight (approx.) |
| 28401.0-00 | V2A(DIN 1.4301 / AISI 304)1 | IP66 (EN 60529) / IPX9K (EN 40050-9) | 1 | 0.2kg |
| 28401.0-02 | V4A (DIN 1.4404 / AISI 316L) | IP66 (EN 60529) / IPX9K (EN 40050-9) | 1 | 0.2kg |
1V2A is not sea waterproof
TECHNICAL DRAWING
