導軌固定架 SF 095
STEGOFIX can only be mounted on smooth surfaces, e.g. metals, lacquered surfaces and plastics (except polyethylene, polypropylene and rubber). The surfaces must be dry, free from dust, oil, separating
TECHNICAL DETAILS
| Load | self-adhesive (non-ageing, high-performance adhesive band) |
| Mounting | self-adhesive (non-ageing, high-performance adhesive band) |
| Material | plastic according to UL94 V-0 |
| Dimensions | 92 x 62 x 48mm |
| Screw pitch | 12.8mm, ? 3.6mm; for perforated 35mm DIN rails |
| Operating/Storage temperature | -45 to +70°C (-49 to +158°F) |
| Approvals | EAC |
1 depending on the conditions of use (e.g. surface condition, size of the device to be mounted, etc.) higher loads were achieved.
Installation
STEGOFIX can only be mounted on smooth surfaces, e.g. metals, lacquered surfaces and plastics (except polyethylene, polypropylene and rubber). The surfaces must be dry, free from dust, oil, separating agents and other contamination.
Note:When using the STEGOFIX as a DIN rail holder, only DIN rails (EN 60715) with perforation 18 x6.2mm or 18 x 5.2mm can be used.
| Art. No | 1 packing unit | Weight (approx.) |
| 09510.0-01 | 5 pieces | 60g (12g/pc.) |
